Skip to content
Answered 24/7(720) 964-0667
Homeowner guide

Backflow Testing for Denver Sprinkler Systems

If your home has an irrigation system, the backflow assembly protects the drinking water supply and usually needs testing every year.

MKBy Mabel Ketchum, Plumbing Guides Editor · June 24, 2026
insulated cover on an irrigation backflow assembly beside a frosty lawn

What a backflow assembly does

Sprinkler lines sit in soil with fertilizer, pesticides and animal waste. If pressure in the street main drops, water could siphon back from those lines into the drinking supply. A backflow assembly stops that from happening.

Why testing is required

The springs and seals inside can wear or stick without any visible sign. Water providers in the Denver area generally require irrigation backflow assemblies to be tested by a certified tester, often every year and after any repair.

Protecting it through winter

An above ground assembly will crack if water freezes inside. In fall, after the sprinkler blowout, the assembly should be drained and insulated or removed according to its design.

  • Shut off the irrigation supply valve inside the house
  • Have the system blown out
  • Open test cocks to drain the assembly
  • Cover it with an insulated bag

Spring startup

Open the supply slowly to avoid water hammer, check for leaks at the assembly and schedule the annual test early before the summer rush.

Want a plumber to take a look?

Call any hour. A person answers and can usually tell you on the phone whether it needs a visit.

(720) 964-0667
Call (720) 964-0667 · 24/7